Monday, March 9, 2020

Spin Drift:10 The Quilting Begins

Together at Last

The minute I had delivered the Bountiful Baskets quilt I was hard at work putting together the last blocks of Spin Drift. 

There was a good day and a half of piecing left, but the change of pace was welcome. I had an accident with a pin, and completely sewed a block into the center upside down. It never pays to hurry.

The sun had set late in the day when I was making decisions on backing and thread. I found a great buy earlier this winter on this text print backing, and it suited me just fine. You can see the threads in the top picture I had been playing with, and spooling out thread onto the blocks. You might notice there are some fairly vibrant colors on those cones, but don't panic. I learned something valuable by playing with the unwound thread.

A neutral on a color is a high contrast.
A color on a color is a neutral.

I really wanted the pattern and fabrics in this quilt to shine so I needed thread choices that would blend. We would call that a neutral choice. In this case, those bright colors are neutrals. 

Neutral thread on neutral fabrics blend well. There is low contrast or in this case almost none. That would make the background quilting almost disappear. I was going for texture only. Stay tuned this week, and I'll show you some stitching with some of those bright thread colors, and hopefully I'm right.

In the weeks leading up to the finish of the Spin Drift top, I'd been planning the quilting. Again, the quilting motifs needed to take a secondary position, and just compliment the pattern and fabric. First, I started by using a smoke colored monofilament thread by Superior Threads to ditch-stitch the entire top. Then I switched to a 60# Glide, and started working from the bottom up. The background fills would be first.

I finished off the small Dresden plate background areas, but left the actual plate until later. I try to do as much as I can without changing threads until it's necessary.

What You Need to Know:
Two Types of Ditch-stitching

Then it was time to ditch-stitch the squares on point.  We don't naturally think of it, but it's important to consider how the seams on the back of the quilt are pressed before outline or ditch-stitching. When I worked through the quilt with the monofilament, I took care to keep the stitching pretty close to the actual seam line. The block seams on the back of the quilt were pressed to the side. And even though I was stitching through a seam, there was still a layer of fabric behind it.

But here, in all parts of the sashing, the seams have been pressed open, and stitching directly in the ditch would stress the stitching that holds the fabric together. There is no layer of fabric under an open seam--just the stitches. So my ditch-stitching is very close, but not in the seam. It lays beside it so it can go through fabric.

You can see the seam to the left is ditch-stitched very near the center there. The area around the appliqued Dresden can be stitched as close as possible without snagging into the points. There is no vulnerable seam below.

I'll have some good progress to show you the next time you stop in, and maybe before my daffodils bloom! Oh, spring is SO close here you can smell it!

Come on, Doxie girls.
Let's go sew.


Linda Swanekamp said...

I just love this quilt. I love the color and pattern combos, the designs, the excitement and I am sure I will love the quilting. This is one of my favorites.

KaHolly said...

You are such a natural teacher. I learn so much from reading your posts. And I am left feeling so inspired! This quilt is gorgeous, Julie! I’ll bet it is so much fun to quilt! I can’t wait to see what you do next!

Janice Holton said...

Oh boy I can't wait to see what you are going to do with the bright threads! That quilt is one of my very favorites I've seen lately. YUMMY!!!

Rebecca Grace said...

This is looking fabulous, Julie! Great explanations about thread choices, and that's a really good way to address ditch quilting where seams are pressed open. Question about your quilting process -- when you did your ditch stitching with monofilament, did you do any basting or pinning in the larger unquilted areas before advancing your quilt to the next question? Asking because Lisa Calle told us (in her longarming workship at Paducah) that she uses her built-in 1/4" basting stitch to throw some meandering basting stitches in any unquilted area larger than her fist when she custom quilts as you're doing. I don't have a programmed basting stitch on my APQS machine like you do on your HQ (and like Lisa has on her Q24 Bernina) but I did run into trouble on a previous quilt where I did all the SID first, then went back to do fills, and I got some pleating from shifting that must have happened as I was rolling the quilt back and forth on my frame.

Deb said...

I found your quilt googling spin drift I just bought the pattern been searching forever for it and I can 't wait to start your quilt is stunning and with your custom quilting it will be a showcase. I was able to scroll and see your progress thanks so much for taking the time to share. Do you have it quilted now?

Kathy S. said...

Oh these fabrics and your circle quilting is stunning. My friend, Linda, made an impressive sample block at your class. Thanks for bringing artistic joy to the world.